Ideal for vehicle trim, guns, musical instruments, fishing lures, etc.

The system plates within a couple of minutes over a nickel or copper base. To plate over chrome, the existing chrome plate must be removed by stripping with Anodize & Chrome Stripper.

Black Krome™ can be plated by brush plating or by an immersion technique.

Black Krome will plate over Nickel, Copper, Steel, Tin & Lead.

For brush plating, a 4.5 volt power supply and a stainless steel wand is required. Immersion plating requires 0.24 amps per square inch at 3-7V.

For tank (immersion) plating, the solution is best used at 140 deg f, using a stainless steel anode. Because the plate is derived from the solution and not the anode, the solution will need to be replaced periodically.

When plating over nickel, the color will have a metallic smoky black look, whereas over copper, a darker black will be achieved.

The finish should be waxed with Collinite Insulator or Metal Wax, or clearcoated.

1 Gallon Small

1 x 2 Gal Tank and Lid
1 x Stainless Steel Anode
1 Gal Black Krome™ Solution
1 x 300W Heater
1 x Thermostat
Caswell Plating Manual
Free Technical Support

2 Gallon Medium

1 x 3.5 Gal Tank and Lid
2 x Stainless Steel Anode
2 Gal Black Krome™ Solution
1 x 300W Heater
1 x Thermostat
Caswell Plating Manual
Free Technical Support

4 Gallon Large

1 x 5 Gal Tank and Lid
2 x Stainless Steel Anode
4 Gal Black Krome™ Solution
1 x 300W Heater
1 x Thermostat
Caswell Plating Manual
Free Technical Support