| Copy
Cad® & Zinc Plating Kit
All the benefits of CADMIUM & ZINC PLATING without
the dangers!
No cyanides! No dangerous chemicals!
No fumes! No disposal problems
Sacrificial (cathodic) coating - Just like real
Cadmium
Inexpensive - no need to deal with plating shops!
Excellent corrosion resistance!
|
Now, Copy Cad® AND Zinc plating
in one kit. By simply adding a special brightener to the solution,
the normally dull, flat, whitish look of Copy Cad® is
transformed into a commercial quality bright zinc plate. After
use, the bath reverts back to the original Cadmium look.
This simple system is designed to give professional
results without a complicated 'chemistry set'. The kit comes
with an Abrasive wheel which provides a 'flat' finish to the
metal for Copy Cad® .
These kits are designed to provide a professional
zinc finish to a variety of substrates on small components
such as workshop tools, brake boosters, brackets and zinc
alloy carburetor castings.
|
1.5 Gallon Kit:
- 2 x 2 Gal Plating Tanks & Lids
- 2 x 4" x 8" Zinc Anodes
- 1 Quart Copy Cad® /Zinc Solution (Makes 1.5 Gals)
- Zinc Brightener
- 1 Pack Degreaser
- 2 x 300W Heaters
- 1 x Heater Thermostat
- Abrasive Nylon Wheel
- The Caswell Plating Manual
- Free Technical Support
|
3 Gallon Kit:
- 2 x 3.5 Gal Plating Tanks & Lids
- 2 x 4" x 8" Zinc Anodes
- 2 Quarts Copy Cad® /Zinc Solution (Makes 3 Gals)
- Zinc Brightener
- 2 Packs Degreaser
- 2 x 300W Heaters
- 1 x Heater Thermostat
- Abrasive Nylon Wheel
- The Caswell Plating Manual
- Free Technical Support
|
4.5 Gallon Kit:
- 2 x 6 Gal Plating Tank & Lid
- 2 x 4" x 8" Zinc Anodes
- 3 Quarts Copy Cad® /Zinc Solution (Makes 4.5 Gals)
- Zinc Brightener
- 2 Packs Degreaser
- 2 x 300W Heaters
- 1 x Heater Thermostat
- Abrasive Nylon Wheel
- The Caswell Plating Manual
- Free Technical Support
|
Zinc plating is a most valuable tool when used in
combating corrosion of steel.
The zinc corrodes before the steel does, sacrificing
itself for the benefit of the steel. A metallurgical bond is formed
between the zinc and steel forming an iron rich alloy with tenacious
bond. Galvanizing can be left unpainted where it will form its own
protective oxide layer.
The system requires a small DC power supply at the rate of 140 milliamps per sq inch
of surface area @ 1.5 - 2 volts.
|
